GM
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Accelerator Pedal Position Sensor 2 Circuit Conditions
Cause:
    DTC P0601, P0602, P0606, P1517 and P1518 not set, key in run or crank mode, system voltage over 5.23v, then the PCM detected that the APP 2 signal was under 0.68v or was over 4.5v (under 0.83v or over 4.81 v on VIN G), condition met for under 1 second

Honda
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Accelerator pedal position (APP) sensor 2 - circuit malfunction
Cause:
    Wiring open circuit/short circuit to ground/ short circuit to positive, APP sensor, ECM

Isuzu
Type:
    Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description:
    Accelerator pedal position (APP) sensor 2 - circuit malfunction
Cause:
    Wiring open circuit/short circuit to ground/ short circuit to positive, APP sensor, ECM