Chrysler Sebring Coupe (FJ) 2.0 i 16V (147 Hp) Automatic
People\'s Opinion
N/A / 5
Chrysler Sebring:
The Chrysler Sebring is a mid-size automobile manufactured and marketed by Chrysler from 1995 to 2010 in convertible , sedan , and coupe body styles. Both coupe generations were a Chrysler design with engineering input from Mitsubishi and were built at Mitsubishi’s Normal, Illinois facility. The range was introduced in 1995, with the Coupe replacing the Chrysler LeBaron coupe. In 1996 Chrysler introduced the convertible, replacing its LeBaron counterpart....(Read more on Wikipedia)
Coupe (FJ) Overview:
Chrysler Sebring (Coupe (FJ)). With 174 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~10.3 l/100km). With a weight of 1319 kg, it falls in the mid‑range. Front‑wheel drive delivers efficiency and easy handling. Acceleration is relatively slow (0–100 km/h in 11 s). A two-door car with a fixed roof, known for its sporty design and dynamic performance. Seating for 5 makes it ideal for daily use.
Performance Verdict
Smooth but uninspiring acceleration, suitable for relaxed cruising rather than spirited driving. The automatic dulls responsiveness.
Fuel Economy
Slightly less efficient than the manual, typical for automatic transmissions of its era, especially in urban settings.
Best Use Case:
Best suited for comfortable urban commuting and relaxed highway cruising.
Pros and Cons:
Pros:
- • Distinctive and attractive styling for its era
- • Comfortable and smooth ride, especially on highways
- • Spacious interior for a coupe, with decent trunk space
- • V6 engine offers good refinement and adequate power
Cons:
- • Handling is uninspired and lacks sportiness
- • Interior quality can feel dated and prone to wear
- • Modest performance from the 2.0L engines
- • Limited aftermarket support compared to rivals
Specifications:
| General: |
| Brand: | Chrysler |
| Model: | Sebring |
| Generation: | Coupe (FJ) |
| Modification (Engine): | 2.0 i 16V (147 Hp) Automatic |
| Start of production: | 1994 |
| End of production: | 2000 |
| Powertrain Architecture: | Internal Combustion engine |
| Body type: | Coupe |
| Seats: | 5 |
| Doors: | 2 |
| Engine: |
| Power: | 147 Hp @ 6600 rpm. |
| Power per litre: | 73.6 Hp/l |
| Torque: | 174 Nm @ 5500 rpm. |
| Engine displacement: | 1996 |
| Number of cylinders: | 4 |
| Engine configuration: | Inline |
| Number of valves per cylinder: | 4 |
| Fuel injection system: | Multi-port manifold injection |
| Engine aspiration: | Naturally aspirated engine |
| Valvetrain: | DOHC |
| Engine oil capacity: | 4.4 l |
| Coolant: | 7 l |
| Engine layout: | Front, Transverse |
| Cylinder Bore: | 87.5 mm mm |
| Piston Stroke: | 83 mm mm |
| Compression ratio: | 9.8:1 |
| Performance: |
| Fuel Type: | Petrol (Gasoline) |
| Fuel consumption (economy) - urban: | 10.3 l/100 km |
| Fuel consumption (economy) - extra urban: | 7.6 l/100 km |
| Acceleration 0 - 100 km/h: | 11 sec |
| Acceleration 0 - 62 mph: | 11 sec |
| Weight-to-power ratio: | 9 kg/Hp, 111.4 Hp/tonne |
| Weight-to-torque ratio: | 7.6 kg/Nm, 131.9 Nm/tonne |
| Acceleration 0 - 60 mph: | 10.5 sec |
| Space: |
| Kerb Weight: | 1319 |
| Trunk (boot) space - minimum: | 371 l |
| Fuel tank capacity: | 60 l |
| Size: |
| Length: | 4760 mm mm |
| Width: | 1770 mm mm |
| Height: | 1296 mm mm |
| Wheelbase: | 2635 mm mm |
| Front track: | 1510 mm |
| Rear (Back) track: | 1505 mm |
| Powertrain: |
| Drivetrain Architecture | The Internal combustion engine (ICE) drives the front wheels of the vehicle. |
|---|
| Drive wheel | Front wheel drive |
|---|
| Number of gears | 4 |
|---|
| Transmission type | Automatic |
|---|
| Front brakes | Ventilated discs |
|---|
| Rear brakes | Drum |
|---|
| Assisting systems | ABS (Anti-lock braking system) |
|---|
| Steering type | Steering rack and pinion |
|---|
| Power steering | Hydraulic Steering |
|---|
| Tires size | 195/70 R14 |
|---|
| Wheel rims size | 14 |
|---|
| Front suspension | Double wishbone |
|---|
| Rear suspension | Double wishbone |
Rate the Chrysler Sebring from 1 to 10!