Fiat Punto Grande Punto (199) 1.9 Multijet (120 Hp)

Fiat Punto:

The Fiat Punto is a supermini car produced by the Italian manufacturer Fiat from 1993 to 2018, spanning over three generations. The third generation of the car was marketed between 2005 and 2009 as the Grande Punto, and between 2009 and 2012 as the Punto Evo, until the single-word Punto name was reintroduced. As of May 2013, nearly nine million units had been sold globally.
Production of the first generation Punto was 3. 43 million units, second generation 2. 96 million units, and third generation 2. 67 million units....(Read more on Wikipedia)

Grande Punto (199) Overview:

Fiat Punto (Grande Punto (199)). With 280 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~7.5 l/100km). Weighing only 1205 kg, it’s quite light. Front‑wheel drive delivers efficiency and easy handling. Acceleration is relatively slow (0–100 km/h in 10 s). The top speed reaches 190 km/h. A compact car with a rear door that swings upward to provide access to the cargo area. Seating for 5 makes it ideal for daily use.

Pros and Cons:

Pros:

• Efficiency-focused engine (120 hp), ideal for city commuting.
• Respectable acceleration of 10 sec, suitable for most driving situations.
• Balanced fuel consumption of 5.6 L/100 km for its class.
• Turbocharged engine ensures better torque delivery at low RPMs.

Cons:

• Compact cargo space (275 L); may require careful packing.
• Meets EURO 4 emission standard; check for local urban restriction zones.
• Previous generation model; may lack the latest driver-assist technologies.

Specifications:

Specifications are compared to those of the previous generation(II (188, facelift 2003) 3dr: 2003 - 2007).

General:
Brand:	Fiat
Model:	Punto
Generation:	Grande Punto (199)
Modification (Engine):	1.9 Multijet (120 Hp)
Start of production:	2005
End of production:	2008
Powertrain Architecture:	Internal Combustion engine
Body type:	Hatchback
Seats:	5
Doors:	3-5

Engine:
Power:	120 Hp @ 4000 rpm. Same horsepower
Power per litre:	62.8 Hp/l [190mm more]
Torque:	280 Nm @ 2000 rpm.
Engine Model/Code:	939A1000 More details about the engine 939A1000
Engine displacement:	1910
Number of cylinders:	4
Engine configuration:	Inline
Number of valves per cylinder:	2
Fuel injection system:	Diesel Commonrail
Engine aspiration:	Turbocharger, Intercooler
Engine oil capacity:	4.2 l
Coolant:	6.3 l
Engine layout:	Front, Transverse
Cylinder Bore:	82 mm
Piston Stroke:	90.4 mm
Compression ratio:	18:1

Performance:
Fuel Type:	Diesel
Fuel consumption (economy) - urban:	7.5 l/100 km
Fuel consumption (economy) - extra urban:	4.5 l/100 km
Fuel consumption (economy) - combined:	5.6 l/100 km
Emission standard:	Euro 4
Acceleration 0 - 100 km/h:	10 sec
Acceleration 0 - 62 mph:	10 sec
Maximum speed:	190 km/h
Weight-to-power ratio:	10 kg/Hp, 99.6 Hp/tonne
Weight-to-torque ratio:	4.3 kg/Nm, 232.4 Nm/tonne
Acceleration 0 - 60 mph:	9.5 sec

Space:
Kerb Weight:	1205
Max. weight:	1765
Max load:	560
Trunk (boot) space - maximum:	1020 l
Trunk (boot) space - minimum:	275 l
Fuel tank capacity:	45 l

Size:
Length:	4030 mm [190mm more]
Width:	1687 mm [27mm more]
Height:	1490 mm [10mm more]
Wheelbase:	2510 mm [50mm more]
Front track:	1473 mm
Rear (Back) track:	1466 mm
Minimum turning circle (turning diameter):	10.5 m [above average]

Powertrain:
Drivetrain Architecture	The Internal combustion engine (ICE) drives the front wheels of the vehicle.
Drive wheel	Front wheel drive
Number of gears	6
Transmission type	Manual
Front brakes	Disc [bad for performance and cooling.]
Rear brakes	Drum [bad for performance and cooling.]
Assisting systems	ABS (Anti-lock braking system)
Steering type	Steering rack and pinion
Power steering	Electric Steering
Tires size	175/65 R15 H; 185/65 R15 H
Wheel rims size	15
Front suspension	Independent, type McPherson with coil spring and anti-roll bar
Rear suspension	Semi-dependent beam with stabilizer lateral stability