Mazda 6 II Sedan (GH) 2.5 (170 Hp)


Mazda 6:

The Mazda 6 is a mid-size sedan produced by Mazda since 2002, replacing the long-produced Capella/626.
The Mazda6 was marketed as the first example of the company's "Stylish, Insightful and Spirited" design philosophy, followed by the Mazda2 in December 2002, the RX-8 in August 2003, the Mazda3 in January 2004, the Mazda5 in the summer of 2005, the MX-5 in October 2005, and the CX-7 in November 2006. The 2003 Mazda6 is essentially the seventh-generation Mazda 626, part of the 'G' model code family....(Read more on Wikipedia)

II Sedan (GH) Overview:

Mazda 6 (II Sedan (GH)). With 226 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~11.1 l/100km). With a weight of 1420 kg, it falls in the mid‑range. Acceleration is good (0–100 km/h in 8.1 s). The top speed reaches 220 km/h. A four-door car with a separate trunk, ideal for families and daily commuting. Seating for 5 makes it ideal for daily use.

Pros and Cons:

Pros:

  • • Adequate and balanced power output (163 hp) for versatile driving.
  • • Respectable acceleration of 9.2 sec, suitable for most driving situations.
  • • Exceptional fuel efficiency: 5.4 L/100 km.
  • • Ventilated disc brakes for reliable cooling and stopping power.
  • • Generous trunk capacity of 519 Liters.
  • • Turbocharged engine ensures better torque delivery at low RPMs.

Cons:

  • • Meets EURO 5 emission standard; check for local urban restriction zones.
  • • Previous generation model; may lack the latest driver-assist technologies.


Specifications:

Specifications are compared to those of the previous generation(I Sedan (Typ GG/GY/GG1 facelift 2005): 2006 - June, 2008).

General:
Brand:Mazda
Model:6
Generation:II Sedan (GH)
Modification (Engine):2.5 (170 Hp)
Start of production:2007
End of production:2010
Powertrain Architecture:Internal Combustion engine
Body type:Sedan
Seats:5
Doors:4
Engine:
Power:170 Hp @ 6000 rpm. Same horsepower
Power per litre:68.3 Hp/l [10mm less]
Torque:226 Nm @ 4000 rpm.
Engine Model/Code:L5-VE More details about the engine L5-VE
Engine displacement:2488
Number of cylinders:4
Engine configuration:Inline
Number of valves per cylinder:4
Fuel injection system:Multi-port manifold injection
Engine aspiration:Naturally aspirated engine
Engine layout:Front, Transverse
Cylinder Bore:89 mm mm
Piston Stroke:100 mm mm
Compression ratio:9.7:1
Performance:
Fuel Type:Petrol (Gasoline)
Fuel consumption (economy) - urban:11.1 l/100 km
Fuel consumption (economy) - extra urban:6.3 l/100 km
Fuel consumption (economy) - combined:8 l/100 km
Emission standard:Euro 5
Acceleration 0 - 100 km/h:8.1 sec
Acceleration 0 - 62 mph:8.1 sec
Maximum speed:220 km/h
Weight-to-power ratio:8.4 kg/Hp, 119.7 Hp/tonne
Weight-to-torque ratio:6.3 kg/Nm, 159.2 Nm/tonne
Acceleration 0 - 60 mph:7.7 sec
Space:
Kerb Weight:1420
Max. weight:1930
Max load:510
Trunk (boot) space - minimum:519 l
Fuel tank capacity:64 l
Size:
Length:4735 mm mm [10mm less]
Width:1795 mm mm [15mm more]
Height:1440 mm mm [Same height.]
Wheelbase:2725 mm mm [50mm more]
Front track:1550 mm
Rear (Back) track:1550 mm
Powertrain:
Number of gears6
Transmission typeManual
Front brakesVentilated discs [Best for performance and cooling.]
Rear brakesVentilated discs [Best for performance and cooling.]
Assisting systemsABS (Anti-lock braking system)
Steering typeSteering rack and pinion
Power steeringElectric Steering

Behind the wheel of the Mazda 6. How does it handle on the road?