Peugeot 406 Break (Phase II, 1999) 2.0 HPi (140 Hp)


Overall Rating

7.5 / 10
Safety 3.0 / 5
Engine 4.0 / 5
Value 4.0 / 5
Performance 3.8 / 5
Comfort 4.5 / 5
People\'s Opinion N/A / 5
Not Rated

Peugeot 406:

The Peugeot 406 is a large family car that was produced by French automaker Peugeot between 1995 and 2004. Available in saloon, estate and coupé bodystyles with a choice of petrol or turbodiesel engines, the 406 replaced the Peugeot 405 in Peugeot's lineup, and was itself replaced by the Peugeot 407.
The styling of the 406 is heavily influenced by its predecessor, the 405, which began to be phased out from the 406's launch in September 1995, and eventually finished production in Europe in 1997, when the last estate models were discontinued. United Kingdom sales of the 406 began in February 1996....(Read more on Wikipedia)

Break (Phase II, 1999) Overview:

Peugeot 406 (Break (Phase II, 1999)). With 192 Nm of torque, it offers ample pulling power. It has moderate fuel consumption (~10.4 l/100km). With a weight of 1400 kg, it falls in the mid‑range. Front‑wheel drive delivers efficiency and easy handling. Acceleration is relatively slow (0–100 km/h in 10.8 s). The top speed reaches 203 km/h. A car with an extended rear cargo area, combining passenger comfort with increased storage. Seating for 5 makes it ideal for daily use.

2.0 HPi (140 Hp) Verdict:

Rating 4 stars

Performance Verdict

Offers good power and decent mid-range punch, providing a lively driving experience for a petrol engine.

Fuel Economy

Improved fuel economy compared to the standard 2.0 16V, thanks to direct injection, but still not diesel-level efficiency.

Best Use Case: Mixed driving, for those seeking a more efficient petrol option.

Pros and Cons:

Pros:

  • • Exceptional ride comfort and handling balance
  • • Spacious and practical estate body with large boot capacity
  • • Elegant and timeless design
  • • Economical and torquey HDi diesel engines
  • • Good value on the used car market

Cons:

  • • Some petrol engines can be thirsty, especially the V6
  • • Potential for electrical gremlins and minor reliability issues
  • • Early FAP (Diesel Particulate Filter) systems can be problematic
  • • Interior plastics feel dated compared to some rivals
  • • Limited advanced safety features by modern standards

Specifications:

Specifications are compared to those of the previous generation(Coupe (Phase I, 1997): 2000 - 2003).

General:
Brand:Peugeot
Model:406
Generation:Break (Phase II, 1999)
Modification (Engine):2.0 HPi (140 Hp)
Start of production:2001
End of production:2004
Powertrain Architecture:Internal Combustion engine
Body type:Station wagon (estate)
Seats:5
Doors:5
Engine:
Power:140 Hp @ 6000 rpm. Same horsepower
Power per litre:70.1 Hp/l [120mm more]
Torque:192 Nm @ 4000 rpm.
Engine Model/Code:RLZ EW10D More details about the engine RLZ EW10D
Engine displacement:1997
Number of cylinders:4
Engine configuration:Inline
Number of valves per cylinder:4
Fuel injection system:Direct injection
Engine aspiration:Naturally aspirated engine
Valvetrain:DOHC
Engine oil capacity:4.25 l
Coolant:7 l
Engine layout:Front, Transverse
Cylinder Bore:85 mm mm
Piston Stroke:88 mm mm
Compression ratio:11.4:1
Performance:
Fuel Type:Petrol (Gasoline)
Fuel consumption (economy) - urban:10.4 l/100 km
Fuel consumption (economy) - extra urban:6.2 l/100 km
Fuel consumption (economy) - combined:7.7 l/100 km
Acceleration 0 - 100 km/h:10.8 sec
Acceleration 0 - 62 mph:10.8 sec
Maximum speed:203 km/h
Weight-to-power ratio:10 kg/Hp, 100 Hp/tonne
Weight-to-torque ratio:7.3 kg/Nm, 137.1 Nm/tonne
Acceleration 0 - 60 mph:10.3 sec
Space:
Kerb Weight:1400
Max. weight:2050
Max load:650
Trunk (boot) space - maximum:1740 l
Trunk (boot) space - minimum:525 l
Fuel tank capacity:70 l
Size:
Length:4735 mm mm [120mm more]
Width:1765 mm mm [15mm less]
Height:1500 mm mm [148mm more]
Wheelbase:2700 mm mm [Same wheelbase.]
Front track:1500 mm
Rear (Back) track:1480 mm
Minimum turning circle (turning diameter):11.95 m [above average]
Powertrain:
Drivetrain ArchitectureThe Internal combustion engine (ICE) drives the front wheels of the vehicle.
Drive wheelFront wheel drive
Number of gears5
Transmission typeManual
Front brakesVentilated discs [Best for performance and cooling.]
Rear brakesDisc [above average]
Assisting systemsABS (Anti-lock braking system)
Steering typeSteering rack and pinion
Power steeringHydraulic Steering
Tires size195/65 R15
Wheel rims size15
Front suspensionIndependent, type McPherson with coil spring and anti-roll bar
Rear suspensionIndependent multi-link spring suspension with stabilizer

Your first impression of the Peugeot 406 in one word? Go!